Product Overview
Calcium borate frit is a synthetic, pre-melted borate glass that carries boron and calcium into a glaze in one fully reacted, water-insoluble form. It was developed to do the job natural colemanite and ulexite do - supply B₂O₃ and CaO - without what the raw minerals bring with them: crystal water, seam-to-seam chemistry swings, and partial solubility in the slip.

Why Pre-Melting Changes the Result

Colemanite and ulexite give up roughly a fifth of their mass as steam on the way to melting. In a fast-fire cycle, that steam has to force its way out through a glaze that is already softening - the classic cause of pinholes and micro-bubbles. A synthetic calcium borate frit carries no crystal water at all; loss on ignition reads below 0.2% on our certificate, so there is nothing left to boil off.
The second difference is solubility. Raw borates partly dissolve in glaze slurry, so B₂O₃ creeps upward as the slip ages - the glaze you fire on Friday is not the one you mixed on Monday. In a frit, boron is locked inside the glass network: a stable boron supply that does not move between mixing and firing.
What It Does in the Glaze
Boron melts early and thins the melt, so the glaze levels and seals inside a short cycle instead of at the end of it. Calcium pays the boron back: hardness, scratch resistance and chemical durability that a pure borate flux cannot hold on its own. Dosing is calculated on delivered B₂O₃ - the raw mineral carries roughly twice the concentration per kilogram, so substitution weight is not one-to-one; send us your recipe and we do the conversion.
For systems where expansion is tight, our low sodium calcium borate frit grade holds Na₂O at or below 0.5%, keeping the coefficient of thermal expansion down and alkali-driven surface defects out.

Typical Specification (grade-dependent)
|
Item |
Typical value |
|
B₂O₃ |
17–21 wt% |
|
CaO |
24–28 wt% |
|
Na₂O (low-sodium grade) |
≤ 0.5 wt% |
|
Loss on ignition |
≤ 0.2 wt% |
|
Softening point |
~720°C |
|
Recommended firing window |
1080–1180°C (fast fire); usable to ~1250°C as auxiliary flux |
|
CTE, 100–600°C (COE) |
~6.5–7.5 × 10⁻⁶/K |
|
Grain size |
80–200 mesh, per request |
How Every Batch Is Verified
Composition by XRF, cross-checked with wet chemistry. Particle size by laser diffraction. Melting behaviour by button-flow test against the approved reference. CTE by dilatometer. Whiteness and colorimetric data on opacified grades. Each drum ships with its COA, and batch records stay on file so a shipment from this year can be compared with one from two years ago.
Applications
Fast-fire wall tile base glazes, opaque and transparent glaze systems, engobes, sanitaryware glazes, one-fire decoration lines, and enamel work that needs boron without batch-to-batch surprises.
FAQ
Can it replace colemanite directly?
On delivered boron, yes - that is what it is built for. Substitution is calculated on B₂O₃ content, not raw weight, and the right starting ratio depends on your glaze system. Send the recipe; we return a suggested dosage.
Is the frit soluble in water?
No. Boron sits inside the glass network, so slip composition stays put during storage and recirculation - this is the main practical difference from raw borate minerals.
What data comes with each batch?
A COA covering chemical composition, particle size distribution, melting behaviour, CTE and - where relevant - whiteness and colorimetric values.
Do you support trial quantities?
Yes. Trial material ships with the same COA as production lots, so what you test is what you will buy.
What if our firing curve is unusual?
Tell us the curve. Custom formulation against your body composition and firing profile is part of the service, not an upsell.
CTA
Still fighting pinholes or drifting B₂O₃ in your borate glazes?
Send us your current colemanite dosage, slip aging time and firing curve. Our technical team will propose a replacement plan and ship trial material with full COA - usually within one working day of your enquiry.
Request a Sample
Contact our sales team with your target glaze system and required grain size. Sample lots are packed and certified exactly like production batches.
Hot Tags: calcium borate frit, China calcium borate frit manufacturers, suppliers, factory, engobe glaze for tiles, High Zinc Ceramic Frit, high zinc frit for bone china glaze, high zinc frit for crystalline glaze, Titanium Frit, zinc ceramic frit
